• Accurate, high definition image
• Silent operation
• Simple setup
• Cheap implementation of a large display
• major power savings over PC based implementation
• Space saving

• DVI Video input
• Nine DVI Video Ouptus
• Support for up to 1920x1200 output resolution per monitor
• Multiple video output combinations including full video wall mode, clone mode and vertical replication mode.
• Bexel control compensates for gaps between monitors

Display Modes Selection :   Clone Mode:	Full Mode:	Verticfal Replication Mode:
Clone mode (1x1):    The iVw9s displays the same content on the nine screens.	Full mode (3x3):   The iVw9s divides the input image into sections and stretch the 1/9 image to fit to the selected resolution on each monitor. The full display also support mask enable and disable.	Vertical Replication mode (1x3):   The iVw9s can project the same image on the top three LCD panels and middle and bottom three LCD panels. Customers can require only three LCD panels to create a larger display.

The iVw9s video wall controller supports various display modes that include:

• Clone mode (1x1): The iVw9s unit displays the same content on the four screens.

• Full mode (3x3): The iVw9s unit divides the input image into nine sections and stretch the 1/9 image to fit 
  to the selected resolution on each monitor. The full display also support mask enable and disable

• Vertical Replication mode (1x3): The  iVw9s can project the same image on the top three LCD panels 
  the Middle three and the bottom three LCD panels. Use only three LCD panels to create a larger display, 
  effectively here the videowall can be split into three physical sections, each being 1x3 installed on opposite 
  walls, or different rooms and all displaying the same information.  

• Up to 3072 x 2304 pixel input and up to 1024x768 output per display (depending upon display mode in use 
  can be 1920x1200 for 4 screens).On Screen Display/Remote control functions for selecting; Display mode;

•  Output resolution; Border mask enable/disable and frame wideness adjustment.

•  Bezel mask or screen border adjustment, this is quite an important function, normally the display will be 
  'staggered" from screen to screen due to the use of conventional LCD/Plasma displays, but with this function 
  you can adjust the display to be seamless, e.g mask-out the screen bezel enabling a visually seamless display.

RS-232 communication for remote control (if required) .

Easy-DIY to install and control the videowall or multi-screens, either from a PC, Laptop or remote control.

 Multiple units can be used for larger screen configurations, e.g. by installing a dual channel graphics card 
into a PC then two iVw4's can be connected to enable a 6x3 video wall or multi-screen display or one iVw9 
can be cascaded to four further units to enable a 16x16 videowall / multiscreens. All iVw controllers can 
be "mixed & Matched" to enable various display configurations.

 Optional Live DVI/VGA video insertion, the extremeRGB (optional purchase) can be installed within the PC 
that controls the iVw9s, this will enable  not only a videowall/multi-screen display with all of Windows 
applications, but also live video from other sources that provide DVI or VGA outputs, such as Servers, 
Workstations, Hdmi players, DVI cameras etc..