Our Newsletter


Click to enlarge

eXtremeXP-9 (PCIe 9-Slot Backplane "Switch Fabric")

RRP:
Price:
Contact us on (0)116 2787812
Vendor:
Brand:
Weight:
Rating:
()
Availability:
Shipping:
Gift Wrapping:

Product Description

extremexp-9x.jpg

eXtremeXP9, 9-Slot PCI-Express "Switch Fabric" Backplane
  • Low cost, high performance back plane
  • Nine slot PCIe backplane. Eight x 4 lane slots plus One x 8 lane slot
  • All slots implemented as x 16 physical connectors so any width PCIe card can be accommodated
  • All PCIe slots are connected to a switch fabric providing a peak system bandwidth of 100 Gb/s
  • SBC PICMG 1.3 slot for single board computer
  • Up to 4 back planes per system daisy-chained providing a total of 32 slots
  • Use as a PCIe expansion backplane for a standard PC using the S-Link and H-Link cards
  • Compatible with a standard 4U IPC chassis

  switch_fabric.jpg


 

S-Link and H-Link Cards
The S-Link can be used instead of a PICMG 1.3 SBC to configure the eXtremeXP-9 as an expansion backplane from a standard PC or from other eXtremeXP-9 backplanes by connecting to a H-Link card.

SBC-C2Q.png

Core 2 Quad processor based PICMG 1.3SBH Single Board Computer

     

SBC-C2Q1.png

eXtremeIPC-x9 wall controller 19” chassis

 

eXtremeXP-9 Specifications

 
Max Power (without SBC1) 26W
Power Requirements Max current at +3.3V  - 6A
Max current at +12V – 0.5A
Max current at +5V – 0.1A
   
Form Factor PICMG1.3 Host SBC interface
1 x PCIe (x8) expansion slot
8 x PCIe (x4) expansion slots
   
ATX PSU 4 x 24 pin power connectors
SATA Ports 2 x  ports via PICMG1.3 interface
USB Ports 2 x  ports via PICMG1.3 interface

S-Link

  
Max Power 5W
Power Requirements Max current at +3.3V – 0.1A
Max current at +12V – 0.3A
Max current at +5V – 0.1A
   
Form Factor PICMG1.3
  PCIe x 8 expansion interface

H-Link

  
Max Power 5W
Power Requirements Max current at +3.3V – 0.1A
Max current at +12V – 0.3A
   
Form Factor PCIe x 8

Environment:

  
Express9/S-Link/H-Link
 
Operating Temperature 0 to 35 deg C
Storage Temperature -20 to 70 degC
Relative Humidity 5% to 90% non-condensing
   
SBC1 Specification
   
Features Compatible with the Express9 backplane
PICMG1.3 Core Duo/Quad
Dual Ethernet supported
Dimensions 338mm x 122mm
   
Chipset Intel Q35 and ICH9DO
System Memory 1GB RAM (2GB optional)
I/O Interface 1 x TPM connector
6 x SATA ports with 300MB/s transfer rate supports RAID 0,1, 5 and 10
2 x RS232 serial ports
4 x USB 2.0 ports
16-bit Digital I/O interface
1 x IrDA port
Operating Temperature 0 to 60 degC
Relative Humidity 10% to 95% non-condensing

Find Similar Products by Category

  • PCI Chassis Extension