| CPU Support |
- Support Intel® LGA775 Core™ 2 Quad, Core™ 2 Duo, Pentium® 4/ Pentium® D/ Celeron® D processors with 533/800/1066/1333 MHz
- Intel® Embedded Processor List (Intel® Longevity CPU): Intel® Core™ 2 Quad Processor (Q9400); Intel® Core™ 2 Duo Processor (E8400 & E7400 & E6400 & E4300); Intel® Pentium® Dual Core Processor (E2160); Intel® Celeron® Processor 440
|
| Main Memory |
- 2 x 240-pin DIMM, for up to 8 GB dual channel Non-ECC DDR3 800/1066/1333 SDRAM
|
| Chipset |
- Intel® Q45 Graphic Controller Hub (GMCH)
- Intel® ICH10 DO
|
| BIOS |
- Award system BIOS
- Plug & Play support
- Advanced Power Management and Advanced Configuration & Power Interface support
|
| On-board LAN |
- 2 x Intel® 82574L PCI Express Gigabit Ethernet Controllers
- Support Boot From LAN (PXE)
- 2 x RJ45 with LED
|
| Display |
- Intel® Q45 GMCH Integrated Intel® GMA4500, Max 128 MB of DVMT for Graphics Memory Allocation
- Analog display support up to 2048x1536 @ 75Hz for CRT
|
| Audio |
- HD Audio Codec, Realtek ALC888
- 3 x (1x4-pin) headers for Line-in / Line-out / MIC-in
|
| I/O Interfaces |
- USB 2.0: 8 ports (4 on board, 4 to backplane)
- Serial port: 2 port, with 2x5pin headers (COM 1 and COM 2)
- SATA HDD: 6 ports, Support RAID 0/1/5/10 and Intel Matrix Storage Technology (Intel® MST)
- Parallel port: 1 x 26-pin connector
- Floppy: 1 x 34-pin connector
- IrDA: 1 x 5-pin header
- GPIO: Supports 4 sets general purpose I/O each with TTL level (5 V) interface
- On-board buzzer x1
- Power LED / Power On / Reset / SMBUS : 2 x 8 pin header
- 5-pin for key lock/power LED / HDD Power LED
- 1 x 4-pin fan connector (for CPU); 2 x 3-pin fan connectors (for System)
- IPMB interface through PICMG 1.3 Golden-finger
- I/O On SBC Bracket: 1 x VGA DB-15 connector, 2 x RJ45 Gigabit Ethernet LAN port, 1 x PS/2 Keyboard/Mouse
|
| Watchdog Timer |
- 1-minute increments from 1 to 255 minutes
- 1-second increments from 1 to 255 seconds
- On-chip RTC with battery backup
- 1 x External Li-lon battery
|
| System Monitor |
- 4 Voltages (+3.3V, +5V, +12V, Vcore)
- 2 Temperatures (For CPU and System)
- 3 FAN speed monitors (1 for CPU and 2 for System FAN)
|
| Dimensions |
- PICMG 1.3 SHB, Dimension: 338.58mm (L) x 126.39mm (W) (13.3" x 4.9")
|
| Power Input |
- Power source from backplane through golden finger
- Support ATX/AT power supplies
- +12V/ +5V / +3.3V / +5Vsb
|
| Environment |
- Board level operating temperatures: -15°C to 60°C
- Storage temperature: -20˚C to 80˚C
- Relative humidity: 10%~90%, (Non-condensing)
|
| Certifications |
|